12ED Electric Drive Wire Flame Spray Gun

Suitable for spraying hard wires like Stainless-Steel, Molybdenum, etc

The Metal Coat 12ED Wire Flame spray gun is the state-of-the-art electric drive wire flame spray gun. Here, in this model, an AC powered motor is provided, which ensures constant wire feed rates, thereby preventing any variation in speed that may occur in air-driven wire feeding.
The constant wire feed rate makes it very easy to spray hard wire such as Molybdenum, Stainless Steel, Mild Steel, etc. and results in excellent coatings. The 12ED Model requires comparatively less maintenance than the other wire flame spray torches.

Spray Coating Wires Used

The Metal Coat 12ED Wire Flame Spray Manufacturer Torch Model is designed to spray hard wires like stainless steel, Molybdenum with ease. The standard wire size used is 1/8″ (3.17mm). It can also spray wire sizes of 11G, 15G, 1.6mm, 2mm, and 2.5mm.

wire flame spray

12ED Wire Flame Spray Setup

12ED WIRE FLAME SPRAY

Specifications

WIRE FLAME SPRAY GUN-12ED

TypeFeature Description
Operation Manual
Wire Feed AC Motor
Wire Size Standard 1/8” (3.17mm)
Wire Size Optional 11G, 15G, 1.6mm, 2mm, 2.5mm 
Gasses Used Oxygen and Fuel Gas
Fuel GasAcetylene or LPG / Propane etc.
Compressed Air 35 CFM at 75 psi (5 bar)
Net WeightApprox. 4.2 Kg. (Gun Only)
Shipping Weight Approx. 8 Kg

FAQ

1. What is the difference between 11ED and 12ED Wire Flame Spray Gun?
Metal Coat 11ED wire flame spray gun is powered with DC Drive motor, whereas Metal Coat 12ED has an AC Drive Motor. 11ED is recommended only for soft and low melting wires, whereas 12ED is capable of spraying both low and high melting wires. The maximum wire size that can be sprayed in 11ED is limited to 3.17mm, whereas 12ED can spray wires of up to 4.76mm in diameter. Our 11ED Model requires very little maintenance as compared to the 12ED Model. 
2. Which are the components that need to be changed if we have to change wire size in Model - 11ED? 
Nozzle and Siphon Plug needs to be changed while moving to the required wire size. 
3. Which are the components that need to be changed if we have to change wire size in Model - 12ED? 
Upper drive roller, gear, and siphon guide need to be changed while moving to the required wire size.