ARC SPRAY GUN (DC DRIVE)

Model: 102DC

Arc Spray System Setup

Specification

TypeFeature Description
Size 440mm (L) x 80mm (W) x 185mm (H)
Drive 24V DC Semi Servo Motor
Net Weight 4.5Kg.

Power Source with Control Console

Model: 100DC

The control consul works for two operating modes called as Pneumatic and electric driven for supplying metallizing wire to the spray nozzle. In the first mode the spray gun is hand held and pulls the wire into the nozzle to get atomized. Where as in second mode the Wire Arc Spray Gun (DC Drive) is attached to an electric driven motor to pull the wire into the spray system. When there is a need to operate the wire arc spray equipment in Lathe Tool post or robot Arc Spray Gun (Air Drive) is recommended for manual operation as it is light in weight. The system is completely mobile and is mounted with trolley wheels for the ease of movement according to the need of operation, A high velocity air facility is inbuilt in the control panel to increase the velocity of the particle for enhanced deposition efficiency, bond strength and fine spray.

Features

Arc Spray System Model: 250 AMP Model: 400 AMP Model: 600 AMP
Max Melting Output (kg./hr.)
Zinc
Aluminum
Cr-Ni-Steel
Al-Bronze

15.00
4.30
6.60 - 7.15
7.50 - 7.95

30.00
8.60
13.20-14.30
15.00-15.90

45.00
12.90
19.80-21.45
22.50-23.85
Maximum Coverage (m3/100m/hr)
Zinc
Aluminum
Cr-Ni-Steel
Al-Bronze

13.05
13.03
7.29
10.90

26.10
26.06
14.58
21.78

39.15
39.10
21.87
32.67
High Velocity option installedYesYesYes
Wire Size ( Diameter)1.6mm to 2mm 1.6mm to 3.17mm2mm to 3.17mm
Wire FeedBoth Pneumatic & Electric DriveBoth Pneumatic & Electric DriveBoth Pneumatic & Electric Drive
Power Source with control console weight117 kgs. (approx.)156 kgs. (approx.)333 kgs. (approx.)
Dimension37” x 18” x 39”40” x 22” x 43”36” x 26.5” x 45”
Power Requirement 7KW / 9.5 HP15KW / 20 HP25KW / 33.5 HP
Power Source Input
Voltage (V)
Phase (nos)
Frequency (Hz)
Rating:@60% Duty Cycle
@100% Duty Cycle

415V±10
3
50
22.5 (KVA)
18 (KVA)

415V±10
3
50
22.5 (KVA)
18 (KVA)

415V±10
3
50
39 (KVA)
31 (KVA)
Power Source Output
Static Characteristics
Open Circuit
Voltage Range

Constant
Potential
18-40

Constant
Potential
18-54

Constant
Potential
65
Max.Output Current
@60% Duty Cycle
@100% Duty Cycle

250 (Amp.)
190 (Amp.)

400 (Amp.)
310 (Amp.)

600 (Amp.)
465 (Amp.)

Arc Spray SystemModel: 250 AMPModel: 400 AMPModel: 600 AMP
Max Melting Output (kg./hr.)
Zinc
Aluminum
Cr-Ni-Steel
Al-Bronze
15.00
4.30
6.60 – 7.15
7.50 – 7.95
30.00
8.60
13.20-14.30
15.00-15.90
45.00
12.90
19.80-21.45
22.50-23.85
Maximum Coverage (m3/100m/hr)
Zinc
Aluminum
Cr-Ni-Steel
Al-Bronze
13.05
13.03
7.29
10.90
26.10
26.06
14.58
21.78
39.15
39.10
21.87
32.67
High Velocity option installedYesYesYes
Wire Size (Diameter)1.6mm to 2mm1.6mm to 3.17mm2mm to 3.17mm
Wire FeedBoth Pneumatic & Electric DriveBoth Pneumatic & Electric DriveBoth Pneumatic & Electric Drive
Power Source with Control Console Weight117 Kgs. (approx.)156 Kgs. (approx.)333 Kgs. (approx.)
Dimension37” x 18” x 39”40” x 22” x 43”36” x 26.5” x 45”
Power Requirement7KW / 9.5 HP15KW / 20 HP25KW / 33.5 HP
Power Source INPUT
Voltage (V)
Phase (Nos)
Frequency (Hz)
Rating @60% Duty Cycle
@100% Duty Cycle
415V±10%
3
50
14 (KVA)
18 (KVA)
415V±10%
3
50
22.5 (KVA)
18 (KVA)
415V±10%
3
50
39 (KVA)
31 (KVA)
Power Source OUTPUT
Static Characteristics
Open Circuit Voltage Range
Constant Potential
18-40
Constant Potential
18-54
Constant Potential
18-65
Max. Output Current
@ 60% Duty Cycle
@ 100% Duty Cycle
250 (Amp.)
190 (Amp.)
400 (Amp.)
310 (Amp.)
600 (Amp.)
465 (Amp.)

Portable Wire Feed & Gun Stand

Hoses & Cables