
Air Blast Cabinets
Air blast cabinets can take the form of a blast cabinet, the blast media is pneumatically accelerated by compressed air and projected by nozzles on to the component.
We manufacture Blasting Cabinets, which works on the principle of direct pressure blasting, inductionsuction blasting and slurry pumping. The blasting is done via Guns, as the abrasives are introduced using compressed air. This whole process is carried out in closed chambers ensuring safety and dust free blasting. The cabinets are fabricated from heavy gauge mild steel, so it can withstand bombarding of abrasives.
The abrasives are recollected and re-circulated in the chamber. Dust bags are also provided, to separate dust and debris from abrasives. For the shaking of Dust Bags, manual and motorized shaking is used.
We manufacture Blasting Cabinets, which works on the principle of direct pressure blasting, inductionsuction blasting and slurry pumping. The blasting is done via Guns, as the abrasives are introduced using compressed air. This whole process is carried out in closed chambers ensuring safety and dust free blasting. The cabinets are fabricated from heavy gauge mild steel, so it can withstand bombarding of abrasives.
The abrasives are recollected and re-circulated in the chamber. Dust bags are also provided, to separate dust and debris from abrasives. For the shaking of Dust Bags, manual and motorized shaking is used.
Machines are used for:
- Cleaning of impurities
- Deburring
- Hardening, shot peening
- De-oxidation
- Grazing for esthetical purposes
- Paint removal
- Surface preparation before painting, rubber coating etc.
Suction Blast Cabinets
It is based on the principle of Induction-Suction abrasive blasting. Best suitable for blast cleaning, de-burring, de-scaling, removing thin deposits on soft metal parts and de-flashing of plastic goods and molded components. It is also used to provide a matte finish. It is the simplest and most effective way for removing corrosion and old paint. The machine actuates by pressing the foot pedal, extracting air which mixes with the air and finally ejected via gun through nozzles.
Pressure

Pressure Blast Cabinets
It is based on direct pressure principle of blasting. The pressure blaster produces high abrasive velocity which results in completing the job at a faster rate. A pressure vessel, directly bolted below a hopper of a cabinet, has an automatic abrasive refilling arrangement. It is recommended for removing heavy and thick scales, de-burring and de-flashing is done by selecting medium and coarse grain.

Features
- Easy vision: We provide large window glass (protected by a wire screen assembly). Also, high illumination is used for clear visibility while blasting.
- Gasketted Doors are provided with locking systems and are easy in operation. Slider doors are also available.
- The stand on which operator stands, is designed for relaxing working. Also, foot switch is provided for operator for easy control.
- Generally, all cabinets are rubber lined.
- The operator can use both his hands via sealed hand holes for holding a gun, thus ensuring maximum safety.
- Simple in operation and ready to operate when connected to electrical and air supply. No erection required.
- Easy fitment of spares, whenever required.
- The environment is dust free because of dust collection assembly. Noise level is maintained at below 80 DBA. Also, proper ventilation is provided for easy visibility.
Abrasive Media
Abrasive media for shot blasting equipment is used for a wide variety of applications including abrasive blasting, shot peening, deburring, polishing, and other surface finish processes. The abrasive media are available in a wide range of types, hardness, grit and mesh sizes.
Application Area / To Be Used For:
- Cleaning
- Removing Machine Marks
- Scale and/or Rust Removal
- Paint and Coating Striping
- Edge Rounding
- Non-Skid Coatings
- Deflashing
- Surface Preparation

Aluminum Oxide Grit
Aluminum Oxide Grit is a sharp,
long lasting abrasive media that is highly efficient and highly reusable. Harder than most blast media, Aluminum Oxide Blast Media, will clean and etch quickly on all type of surfaces.

Glass
Bead
Glass Beads are a round, spherical media that produce a clean, bright, peened, satin finish, without dimensional change of the parts. It used for blasting, peening, honing, cleaning, and light deburring.

Steel
Shot
Steel Shot is ideal for peening
applications to impart a clean,
smooth finish. This dense, smooth
media can be used up to 3,000
times and produces minimal dust
during the blasting process.

Steel
Grit
Steel Grit is an angular, carbon
steel media designed for quick and
effective removal of surface
contaminants and coatings. Steel
Grit is softer than other media and
is less likely to fracture leaving an
etched finish.

Chilled
Iron Grit
Chilled iron is a hard abrasive
making it suitable for etching
purposes, but less resistant to
impact.
It is suitable to be used in blast rooms for fast cleaning and edging.
It is suitable to be used in blast rooms for fast cleaning and edging.

Chilled
Iron Shot
Chilled iron shots are round shape
having white structure made from
cast iron scrap. These are widely
used for cleaning in foundries, in
castings for sand removal ,
removing old paints, blasting of
stone etc.
Specification | Suction Blast(SB) | Pressure Blast(PB) | ||||
---|---|---|---|---|---|---|
SB-6060 | Sb-9182 | SB-12090 | PB-9182 | PB-12090 | PB-150120 | |
Working Chamber Height (mm) Width (mm) Depth (mm) | 600 600 600 | 775 910 820 | 900 1200 900 | 775 910 820 | 900 1200 900 | 900 1500 1200 |
Overall Dimensions: Height (mm) Width (mm) Depth (mm) | 1660 800 1500 | 2120 1070 1400 | 2570 1365 1700 | 2130 1100 2500 | 2030 1365 2430 | 2080 1665 2730 |
Approx. Weight (Kgs.) | 250 | 380 | 490 | 580 | 650 | 760 |
Nozzle Orifice (mm) *Standard size supplied unless ordered otherwise* | *6 8 | *8 10,12 | *10 8,12 | *5 6 | *5 6 | *5 6 |
Injector orifice | *2 3 | *3 4,5.5 | *4 3,5.5 | - | - | - |
Abrasive Storage Capacity Ltrs. | 28 | 28 | 42 | 28 | 42 | 42 |
Fan Capacity CFM | 200 | 400 | 600 | 500 | 500 | 800 |
Compressed Air Required (cfm) at 5.63 Kg./Sq. Cm (80 psi) | 25 | 25 | 35 | - | - | - |
Dust Collector/Mist Collector / Reclaimer Fan Motor HP | 0.5 | 1.0 | 1.5 | 1.0 | 1.0 | 1.5 |
Production Output | Medium & Low | High & Medium | ||||
Blasting Media Size | Medium & Fine | Coarse & Medium | ||||
Blasting Surface | Thin & Deposite | Thick & Deposite | ||||
De-Flashing / De-Burring | Soft Metal Parts | Hard Metal Parts |
Specification | SB-6060 | SB-9182 | SB-12090 | PB-9182 | PB-12090 | PB-150120 | ||||
---|---|---|---|---|---|---|---|---|---|---|
Working Chamber Height (mm) Width (mm) Depth (mm) | 600 600 600 | 775 910 820 | 900 1200 900 | 775 910 820 | 900 1200 900 | 900 1500 1200 | ||||
Overall Dimensions Height (mm) Width (mm) Depth (mm) | 1660 800 1500 | 2120 1070 1400 | 2570 1365 1700 | 2130 1100 2500 | 2030 1365 2430 | 2080 1665 2730 | ||||
Approx. Weight (Kgs.) | 250 | 380 | 490 | 580 | 650 | 760 | ||||
Nozzle Orifice (mm) *Standard size supplied unless ordered otherwise* | *6 8 | *8 10, 12 | *10 8, 12 | *5 6 | *5 6 | *5 6 | ||||
Injector orifice | *2 3 | *3 4, 5.5 | *4 3, 5.5 | – | – | – | ||||
Abrasive Storage Capacity Ltrs. | 28 | 28 | 42 | 28 | 42 | 42 | ||||
Fan Capacity CFM | 200 | 400 | 600 | 500 | 500 | 800 | ||||
Compressed Air Required (cfm) at 5.63 Kg./Sq. Cm (80 psi) | 25 | 25 | 35 | – | – | – | ||||
Dust Collector/Mist Collector / Reclaimer Fan Motor HP | 0.5 | 1.0 | 1.5 | 1.0 | 1.0 | 1.5 | ||||
Production Output | Medium & Low | High & Medium | ||||||||
Blasting Media Size | Medium & Fine | Coarse & Medium | ||||||||
Blasting Surface | Thin & Deposits | Thick Deposits | ||||||||
De-Flashing / De-Burring | Soft Metal Parts | Hard Metal Parts |