Accessories
Gas Control Unit
Consisting of precision two stage
regulators for regulative oxygen and fuel gas supply to gun.

Air Control Unit
Consist of Air regulator with pressure gauge and dual air filter for regulating compressed air supply to the gun.

Hose Kit
Standard length of High pressure hose for oxygen and fuel gas to connect the gun with Gas Control Unit

Vibrator
For certain fine materials or powders that are not freely flowing, the 5PVM Vibrator is available in single phase
220V AC/110 VAC

2GFM Gas Flow Meter
Use for measuring the flow of Oxygen
and Fuel gas and also prevent back fire

Air Jet Assembly
If additional workpiece cooling is required or if denser, harder coatings are desirable, the 2PSA Air Jet Assembly is available. Designed for attachment to the front of the 5P-II gun, it injects high velocity air into the spray stream. Adjustable cooling tubes can be focused towards any part of the spray stream or directly onto the workpiece.

Extension Nozzle
Extension Nozzle for the 5PM-II gun permit coating of interior bore
diameters and surfaces, and are available in three standard lengths:
305mm – 1 Feet
610mm – 2 Feet
910mm – 3 Feet

SAFETY WEARS
Metallizing Helmet
Light weight & comfortable with excellent
vision. Supplied from a separate air supply
which should be filtered by Helmet Air
Conditioner.

Air Breather
This is installed in between
compressed air line originating
from fitting to the operators
helmets. Activated charcoal is
contained in the breather unit
which separates the oil traces from
the compressed air and clean
compressed air is fed to the
operator’s helmet.

Helmet Air Conditioner
Air from the air breather is fed to the helmet air conditioner and air is contained before it is fed to the helmet for breathing. It has also a regulator knob so that the operator can regulate the temperature of air fed to the helmet. It is self driven and doesn’t need external power.

Ear Muff
Light weight & comfort able.
Operator & other personnel close to
the spray operation must wear.
Protect the operator from noise
originating during thermal spray.

Protective Glass
Light weight & comfortable with excellent vision. Operator & other personnel close to the spray operation must wear.

Operator Safety Mask
Ensure clean breathing air at all times. Conforms to current legislation on breathing air quality.

Hand Gloves
These are made of rubber and have anti-static properties. Hand gloves protect the operators’ hand against flying abrasive and static charge if any.

Gas Control Unit
Consisting of precision two stage
regulators for regulative oxygen and fuel gas supply to gun.

Air Control Unit
Consist of Air regulator with pressure gauge and dual air filter for regulating compressed air supply to the gun.

Hose Kit
Standard length of High pressure hose for oxygen and fuel gas to connect the gun with Gas Control Unit

Extension Nozzle
Extension Nozzle for the 5PM-II gun permit coating of interior bore
diameters and surfaces, and are available in three standard lengths:
305mm – 1 Feet
610mm – 2 Feet
910mm – 3 Feet

2GFM Gas Flow Meter
Use for measuring the flow of Oxygen
and Fuel gas and also prevent back fire

Air Jet Assembly
If additional workpiece cooling is required or if denser, harder coatings are desirable, the 2PSA Air Jet Assembly is available. Designed for attachment to the front of the 5P-II gun, it injects high velocity air into the spray stream. Adjustable cooling tubes can be focused towards any part of the spray stream or directly onto the workpiece.

The MPF700 Powder Feeder is specifically designed for thermal spray coatings. Its small size makes it a portable powder feeder, which can be carried to site for job work. The unit is controlled to extremely precise and repeatable feed rates.
SAFETY WEARS
Metallizing Helmet
Light weight & comfortable with excellent
vision. Supplied from a separate air supply
which should be filtered by Helmet Air
Conditioner.

Air Breather
This is installed in between
compressed air line originating
from fitting to the operators
helmets. Activated charcoal is
contained in the breather unit
which separates the oil traces from
the compressed air and clean
compressed air is fed to the
operator’s helmet.

Helmet Air Conditioner
Air from the air breather is fed to the helmet air conditioner and air is contained before it is fed to the helmet for breathing. It has also a regulator knob so that the operator can regulate the temperature of air fed to the helmet. It is self driven and doesn’t need external power.

Ear Muff
Light weight & comfort able.
Operator & other personnel close to
the spray operation must wear.
Protect the operator from noise
originating during thermal spray.

Protective Glass
Light weight & comfortable with excellent vision. Operator & other personnel close to the spray operation must wear.

Operator Safety Mask
Ensure clean breathing air at all times. Conforms to current legislation on breathing air quality.

Hand Gloves
These are made of rubber and have anti-static properties. Hand gloves protect the operators’ hand against flying abrasive and static charge if any.
