12M WIRE FLAME SPRAY GUN
The Metal Coat 12M Wire Flame Spray Gun is a versatile handgun designed for combustion flame spray coating with thermal spray wires. The standard gun is set up to spray 1/8-inch wire using acetylene as the fuel gas. For other sizes, suitable hardware is available for handling all standard wire sizes ranging from 3/16” down to 20 gauges.
The 12 M Wire Flame Spray Gun operates at a controlled speed in the range of about 1.5 feet (457mm) of wire per minute (with standard gears) to almost 45 feet (13,716 mm) per minute (with the special, easily installable, high-speed gear set). The high-speed gear set is for continuous high-speed spraying of the lower melting point metals such as Babbitt, Tin, and Zinc. The gun is ideal for hand-held, fixed, or mobile applications. The entire system (except the compressor) can be mounted on a cart for mobile applications and field repair work.
Application for Wire Flame Spray Gun
- To provide Anti-Corrosion Coating
- To Improve Wear Resistance Properties
- To Reclaim Worn out Parts
- To Enhance Electrical Conductivity
- To Create Thermal Barrier Coating
- To Decorate Articles of varied Material
12M Wire Flame Spray Setup
Spray Coating Wires Used
Generally, all metals and metal alloys in wire form can be used with 12 M Wire Flame Spray equipment for spray coating like Zinc, Copper, Aluminum, Brass, Steel, Stainless Steel, Molybdenum, Nickel Alloy etc. Standard Wire size used are 1/8” (3.17mm), 5/32” (3.97mm),3/16” (4.76mm).
WIRE FLAME SPRAY GUN 12M
TYPICLE SPRAY RATE WITH 1/8" WIRE
WIRE FLAME SPRAY GUN-12M
Typical Spray Rate with 1/8” wire
Note:
- The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
- Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.
